设为首页收藏本站

科技网

[技术] 简易木材燃烧炉制作

[复制链接]
发表于 2016-3-13 21:44:07 | 显示全部楼层 |阅读模式

简易木材燃烧炉制作

简易木材燃烧炉制作

Everytime I’ve done an emergency fair, the most popular alternative cookingmethod that I demonstrate has been the Rocket Stove (by a long shot)! People LOVE this one, including me! It has immediately shot to the top of my FAVORITE’s list and something I recommend EVERYONE should add to their emergency supplies!


 楼主| 发表于 2016-3-13 21:45:13 | 显示全部楼层
A handful of twigs can cook an ENTIRE MEAL!
And if you use the design below it fits anywhere, only weighs about 1 lb, very portable, easy to use, practically free, great for camping,…. Shall I go on?No… lets just go ahead and make one!Grab Some Scraps and Make a ROCKET STOVE!
A huge thanks to Brock, who is an Organic Wellness Doctor by day, and aRocket Stove engineer by night. I got my first Rocket Stove from him, because lets face it, I was NEVER going to get around to making one.
He was nice enough to let me invite myself over to his workshop and be totally obnoxious with my picture-taking. So make sure to check out his Website –PREMIER ROCKET STOVES, and send him a HUGE THANKS :)

简易木材燃烧炉制作

简易木材燃烧炉制作

SUPPLIES:#10 CAN W/ LID – Recycle one or get one from the cannery.2 LARGE 28oz CANS – Eat lots of beans tonight :)EXTRA CAN – You need an extra can to make the shelf.INSULATION – Grab some from the attic.TIN SNIPS – or anything that can cut metal!HEAVY-DUTY GLOVES – So you don’t cut too many fingers off!MARKER – To mark where to cut on the can.WIRE HANGER – To make the handle with.HIGH HEAT SPRAY PAINT – If you want to make it fancy ;)1- Mark & Cut Center Hole!
With the large #10 can , use a lid from the small can and trace a circle.

简易木材燃烧炉制作

简易木材燃烧炉制作

Once you get something that could pass as a circle, get to cutting! This is where you get to use your Tin Snips! But if you want live on the edge, pull out a mini saw, don’t wear any safety goggles, use your toes to cut everything, and go to town!!!

 楼主| 发表于 2016-3-13 21:46:02 | 显示全部楼层

简易木材燃烧炉制作

简易木材燃烧炉制作

Check your tracing skills by seeing if the can fits through the hole you just made.

简易木材燃烧炉制作

简易木材燃烧炉制作

 楼主| 发表于 2016-3-13 21:46:58 | 显示全部楼层
2- Mark & Cut a Hole on the Inside CanNow do the same thing. but this time measure and cut the can that will be going INSIDE the #10 can.Using the piece you just cut out of the #10 can, place it on top of the smaller can and trace!Once you’re ready, let some more sparks fly!

简易木材燃烧炉制作

简易木材燃烧炉制作

4- Cut and Insert the Last CanWith the can you haven’t touched yet, cut off the rim first.Then make about 1.5 inch tabs around the can. (see picture if I’m not making any sense Squeeze, smash, squish and do whatever it takes to get it through both cans.Fold some of the tabs up to make a snug fit.

简易木材燃烧炉制作

简易木材燃烧炉制作

 楼主| 发表于 2016-3-13 21:47:48 | 显示全部楼层
5- Cut LidWith the top lid, trace a circle in the middle of it using one of the smaller cans.Then yes, cut it out.

简易木材燃烧炉制作

简易木材燃烧炉制作

6-Fill With Insulation!First cut tabs around the large can. We cut 8 total, but look below to see approximate spacing.Insulate with whatever you want that won’t catch on fire, I just grabbed some insulation from the attic for mine Pack it in until you can’t fit anymore!Fold down 4 tabs, use a hammer if you need to help flatten them.Place the lid with the circle cut into it, on top.Hammer the remaining 4 tabs on top to secure the lid in place.OR – Just look at the pics

简易木材燃烧炉制作

简易木材燃烧炉制作

 楼主| 发表于 2016-3-13 21:48:35 | 显示全部楼层
7-Add a Shelf!
Almost done! Not sure where my pictures disappeared to for this step (maybe the same place as the I-Pad), but you basically use some of the scrap metal and make a shelf!
***Update – I found my pics!!!***Cut a rectangle metal piece with flaps that will fit inside.Hammer the metal to make if flat if necessary.Cut about an inch on each side of the can.Slide the shelf into place.Fold down flaps.

简易木材燃烧炉制作

简易木材燃烧炉制作

8- Make a Handle
For a finishing touch add a handle to the rocket stove by using a metal hanger. Drill two small holes and thread a piece of hanger into them and bend it into place.

简易木材燃烧炉制作

简易木材燃烧炉制作

 楼主| 发表于 2016-3-13 21:49:19 | 显示全部楼层
9 – Spray Rocket Stove with High Heat Spray Paint
If you want to be real fancy go ahead and spray your finished rocket stove with some high heat spray paint. It will make your stove look pretty (which is very important :), and helps it to last longer!

简易木材燃烧炉制作

简易木材燃烧炉制作

10- You’re DONE! Time to Launch!
I usually just cut up some of the scrap wood we have lying around, but use whatever you have that will fit and burn!Put some small pieces of wood on the shelf (not under, it needs to breathe)Throw some dryer lint in (Save this amazing stuff if you aren’t already :)Light it!And Poof! If will be up in flames before you know it!

简易木材燃烧炉制作

简易木材燃烧炉制作

 楼主| 发表于 2016-3-13 21:50:15 | 显示全部楼层
Now COOK with it!
Keep feeding in wood to keep the fire going for as long as you need!

简易木材燃烧炉制作

简易木材燃烧炉制作

This is sure to WOW anyone you show. So bust it out in your front yard, take it to work, or give it as a teachers’ gift (maybe they can use it to burn some of that ugly apple decor they always get)!
My favorite is to help the kids cook with it and teach them how to make their own dinner!

简易木材燃烧炉制作

简易木材燃烧炉制作

Hopefully these instructions make sense. Sorry, if there’s a million typos and awful grammar, it’s because I’m typing and editing posts while kids are beating each other with Wii controls. Gotta go!
 楼主| 发表于 2016-3-13 22:00:50 | 显示全部楼层

简易木材燃烧炉制作

简易木材燃烧炉制作


简易木材燃烧炉制作

简易木材燃烧炉制作

 楼主| 发表于 2016-3-13 22:03:13 | 显示全部楼层

简易木材燃烧炉制作

简易木材燃烧炉制作

您需要登录后才可以回帖 登录 | 注册

本版积分规则

辽公网安备 21100402204006号|科技网 ( 辽ICP备07501385号-1   

GMT+8, 2019-7-21 00:14

Powered by tech-domain X3.4 Licensed

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表