设为首页收藏本站

科技网

[技术] 水火箭技术之七(转)

[复制链接]
发表于 2013-10-4 06:06:25 | 显示全部楼层 |阅读模式
接至:水火箭技术之六(转)

水火箭

水火箭

70 odd bottles ready for splicing.

水火箭

水火箭

Here are 12 x 2L and 10 x 1.25L splice-pairs

水火箭

水火箭

Components for the Acceleron V rocket are being prepared for assembly.
 楼主| 发表于 2013-10-4 06:06:50 | 显示全部楼层

水火箭技术

水火箭技术

More components for the booster.

水火箭技术

水火箭技术

Flight #2 of Tachyon VII looking back at the pyro launch controller.

水火箭技术

水火箭技术

Looking down on the parking lot during flight #3.
 楼主| 发表于 2013-10-4 06:07:19 | 显示全部楼层

水火箭技术

水火箭技术

Dual deploy mechanism is a combination of the side and in-line deployment mechanisms

水火箭技术

水火箭技术

The drogue parachute is in the nose, and the main in the side.

水火箭技术

水火箭技术

Getting ready to launch the dual deploy on its first flight.

水火箭技术

水火箭技术

Launched using a 9mm nozzle and 130psi.
 楼主| 发表于 2013-10-4 06:07:43 | 显示全部楼层

水火箭技术

水火箭技术

Shortly after the main parachute opened.

水火箭技术

水火箭技术

The kids are now well trained to correctly pick up the parachute and rocket. They even know how to turn off the flight computer.

水火箭技术

水火箭技术

Turning on and attaching the MD-80 clone camera.

水火箭技术

水火箭技术

Second flight ... just starting air-pulse.
 楼主| 发表于 2013-10-4 06:08:20 | 显示全部楼层

水火箭技术

水火箭技术

Flying the MD-80 clone. The video quality is quite good in sunny conditions.

水火箭技术

水火箭技术

Both chutes were attached to the center of gravity to make the rocket come down sideways.

水火箭技术

水火箭技术

CATO on launch #3 destroyed the lowest bottle. Here the nozzle is pushed up into the throat.

水火箭技术

水火箭技术

Top of the bottle blew off. The Robinson coupling remained in the top bottle.
 楼主| 发表于 2013-10-4 06:08:44 | 显示全部楼层

水火箭技术

水火箭技术

Fourth flight. Both the rocket and launcher have been extended.

水火箭技术

水火箭技术

Coming down under the drogue.

水火箭技术

水火箭技术

Panorama made from a composite of a number of frames from the MD-80.

水火箭技术

水火箭技术

There were some very impressive pyro rockets on display.
 楼主| 发表于 2013-10-4 06:09:16 | 显示全部楼层

水火箭技术

水火箭技术

Pressure testing the nozzle seals on the Acceleron booster. You can see the fog in the top bottles.

水火箭技术

水火箭技术

Pressure testing the staging mechanism. There was a small leak, so we replaced the Gardena quick connector.

水火箭技术

水火箭技术

Aligning fins on the booster with the use of a fin alignment jig.
 楼主| 发表于 2013-10-4 06:10:52 | 显示全部楼层

水火箭技术

水火箭技术

Slowly taking shape...again....

水火箭技术

水火箭技术

Mounting the FlyCamOne in the lower part of the rocket. Another camera will be on the sustainer.

水火箭技术

水火箭技术

Tornado coupling Jet Foaming insert.
 楼主| 发表于 2013-10-4 06:11:20 | 显示全部楼层

水火箭技术

水火箭技术

Left to right:
1.Old splice - 2.11L
2.New splice -1.97L
3.Small spliced pair for jet foaming. - 1.35L

水火箭技术

水火箭技术

Testing jet foaming insert in the Tornado coupling.

水火箭技术

水火箭技术

An o-ring popped out during a pressure test on Acceleron V.

水火箭技术

水火箭技术

70mAh LiPo batteries that will be used on the flight computers instead of 9V batteries.
 楼主| 发表于 2013-10-4 06:13:07 | 显示全部楼层

水火箭技术

水火箭技术

Setting up base camp with new gazebo

水火箭技术

水火箭技术

Axion IVb on the pad for test flight

水火箭技术

水火箭技术

Starting altimeter and camera.

水火箭技术

水火箭技术

Launched at 120psi with 1.6L of water.
您需要登录后才可以回帖 登录 | 注册

本版积分规则

辽公网安备 21100402204006号|科技网 ( 辽ICP备07501385号-1   

GMT+8, 2019-11-18 02:57

Powered by tech-domain X3.4 Licensed

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表