设为首页收藏本站

科技论坛

 找回密码
 注册
查看: 8451|回复: 6

[视频] GR-5a型涡轮发动机的制作过程(图解)

[复制链接]
发表于 2007-10-6 22:46:23 | 显示全部楼层 |阅读模式
   GR-5A_Engine_Drawing.jpg
施工期间仿造GR-1涡轮引擎,修改了GR-5 涡轮引擎 。这些修改转化GR- 5到自启动GR-5a 型涡轮发动机。 正在兴建的,完全从"现成"的项目, 800马力的发动机并没有像其他涡轮机。  个人建发动机采用电动启动,电子控制系统,内部发电机发电运行引擎系统。 丙烷燃料来源,外部电池和起动开关,行GR- 5a型几乎包括了所有功能。本人外语水平太差原文如下:
  During the construction of the GRV-1 Turbotug, modifications were made to the GR-5 Turboshaft Engine. These modifications transformed the GR-5 into the  self starting GR-5A turboshaft engine. Being completely constructed from “off the shelf” items, the 8  horsepower engine is like no other turbine. The home-built engine features an electric start, electronic control system, and an internal alternator to generate power to run the engines systems. A propane fuel source, external battery and starter switch is virtually all that is needed to run the GR-5A.

 楼主| 发表于 2007-10-6 22:46:46 | 显示全部楼层
   Finished_GR-5A_Engine__2.jpg

   Finished_GR-5A_Engine__5.jpg

   Finished_GR-5A_Engine__6.jpg

   Finished_GR-5A_Engine__3.jpg

   Finished_GR-5A_Engine__4.jpg

   Control_Panel__5.jpg

 楼主| 发表于 2007-10-6 22:46:59 | 显示全部楼层
   Finished_GR-5A_Engine__8.jpg

   GR-5A_Turboshaft_Engine_Video.jpg

 楼主| 发表于 2007-10-6 22:52:28 | 显示全部楼层
 楼主| 发表于 2007-10-6 22:53:41 | 显示全部楼层
发表于 2009-3-31 22:40:33 | 显示全部楼层
yundiao
aaaaaaa
发表于 2009-5-1 20:19:33 | 显示全部楼层
好资料,谢谢分享
您需要登录后才可以回帖 登录 | 注册

本版积分规则

辽公网安备 21100402204006号|科技论坛 ( 辽ICP备07501385号-1   

GMT+8, 2018-8-16 18:28

Powered by tech-domain X3.4 Licensed

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表