设为首页收藏本站

科技网

科技网 门户 科学技术 机械制造 查看内容

简易木材燃烧炉制作

2018-3-30 19:28| 发布者: dymodel| 查看: 1157| 评论: 0|原作者: 0491

摘要: Everytime I’ve done an emergency fair, the most popular alternative cookingmethod that I demonstrate has been the Rocket Stove (by a long shot)! People LOVE this one, including me! It has immediately ...
简易木材燃烧炉制作
Everytime I’ve done an emergency fair, the most popular alternative cookingmethod that I demonstrate has been the Rocket Stove (by a long shot)! People LOVE this one, including me! It has immediately shot to the top of my FAVORITE’s list and something I recommend EVERYONE should add to their emergency supplies!

A handful of twigs can cook an ENTIRE MEAL!
And if you use the design below it fits anywhere, only weighs about 1 lb, very portable, easy to use, practically free, great for camping,…. Shall I go on?No… lets just go ahead and make one!Grab Some Scraps and Make a ROCKET STOVE!
A huge thanks to Brock, who is an Organic Wellness Doctor by day, and aRocket Stove engineer by night. I got my first Rocket Stove from him, because lets face it, I was NEVER going to get around to making one.
He was nice enough to let me invite myself over to his workshop and be totally obnoxious with my picture-taking. So make sure to check out his Website –PREMIER ROCKET STOVES, and send him a HUGE THANKS 
 
SUPPLIES:#10 CAN W/ LID – Recycle one or get one from the cannery.2 LARGE 28oz CANS – Eat lots of beans tonight EXTRA CAN – You need an extra can to make the shelf.INSULATION – Grab some from the attic.TIN SNIPS – or anything that can cut metal!HEAVY-DUTY GLOVES – So you don’t cut too many fingers off!MARKER – To mark where to cut on the can.WIRE HANGER – To make the handle with.HIGH HEAT SPRAY PAINT – If you want to make it fancy ;)1- Mark & Cut Center Hole!
With the large #10 can , use a lid from the small can and trace a circle.
 
Once you get something that could pass as a circle, get to cutting! This is where you get to use your Tin Snips! But if you want live on the edge, pull out a mini saw, don’t wear any safety goggles, use your toes to cut everything, and go to town!

 
Check your tracing skills by seeing if the can fits through the hole you just made.
 

2- Mark & Cut a Hole on the Inside CanNow do the same thing. but this time measure and cut the can that will be going INSIDE the #10 can.Using the piece you just cut out of the #10 can, place it on top of the smaller can and trace!Once you’re ready, let some more sparks fly!
 
4- Cut and Insert the Last CanWith the can you haven’t touched yet, cut off the rim first.Then make about 1.5 inch tabs around the can. (see picture if I’m not making any sense Squeeze, smash, squish and do whatever it takes to get it through both cans.Fold some of the tabs up to make a snug fit.
 


鲜花

握手

雷人

路过

鸡蛋
上一篇:简易割草机下一篇:自制土豆播种机

辽公网安备 21100402204006号|科技网 ( 辽ICP备07501385号-1   

GMT+8, 2019-11-15 01:43

Powered by tech-domain X3.4 Licensed

© 2001-2017 Comsenz Inc.

返回顶部