设为首页收藏本站

科技论坛

 找回密码
 注册
科技论坛 门户 遥控模型 模型飞机图纸 查看内容

从头开始构建Tricopter

2018-2-13 17:09| 发布者: dymodel| 查看: 85| 评论: 0|原作者: 模型飞机

摘要: 从头开始构建Tricopter Parts used in this build: 1 x Tricopter frame 1 x M3*20 screws + locknuts 1 x KK2 flight controller 1 x Male to male servo connectors 1 x 3 X 3.5mm bullet ESC Power ...
从头开始构建Tricopter

Parts used in this build:
1 x Tricopter frame
1 x M3*20 screws + locknuts
1 x KK2 flight controller
1 x Male to male servo connectors
1 x 3 X 3.5mm bullet ESC Power Breakout Cable
3 x DT750 750kV Motors
3 x Hobbyking F20A Speed Controllers
1 x 4s Turnigy 3000mAh LiPo
1 x BMS-385DMAX Digital Servo (Metal Gear)
1 x Gemfan 9x4.7
1 x Front wheel steering mounts
1 x Male to male servo cables
1 x M3x30 Hex screws (if building the camera tray)
1 x M4 lock nuts (for the DT750's)
1 x Distribution power adapter
1 x Battery strap
1 x Servo extension
1 x 3.5 bullet connectors
(Items without a link I've bought at local shops)
4 mm carbon fiber rod
40+ of 2.5mm zip-ties
1/16th plywood (if building the camera tray)
Blue locktite
CA glue
12mm (1/2 in.) Boom - (Poplar Square Dowel)
Boom Lengths:
Front: 35cm
Back: 37cm 


鲜花

握手

雷人

路过

鸡蛋

辽公网安备 21100402204006号|科技论坛 ( 辽ICP备07501385号-1   

GMT+8, 2018-12-15 15:57

Powered by tech-domain X3.4 Licensed

© 2001-2017 Comsenz Inc.

返回顶部