科技论坛

 找回密码
 注册

扫一扫,访问微社区

楼主: 飞机模型

[技术] 塞斯纳180电动模型飞机制作

[复制链接]
 楼主| 发表于 2015-9-4 20:18:43 | 显示全部楼层

塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作


塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作


塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作


塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作

 楼主| 发表于 2015-9-4 20:20:00 | 显示全部楼层
I was blown away by your Army-insignia 180 and how you flew it at FliteFest. I spoke to you briefly, asking about plans and you pointed me to them on this site - thx. I have since downloaded, printed and started laying them out for cutting. I will hopefully have some more photos of my progress this weekend. Thanks for inspiring me - I'm psyched to build it though I don't think I'll fly it as well as you did!

塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作

 楼主| 发表于 2015-9-4 20:20:53 | 显示全部楼层
Thank you for the great plan. I have always liked these planes and after building several ft planes and some of my own design, I like this one a lot.
Here are some pics and again thank you.

塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作


塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作


塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作


 楼主| 发表于 2015-9-4 20:21:41 | 显示全部楼层
Had a good time flying today.. Only ran 4.5 batteries. But watched my buddy fly his big 3d planes and a real nice FT Mustang I made for him last summer.. Lastnight I got the landing gear on the Army Cessnah. looks complete

塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作


塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作


塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作


塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作

 楼主| 发表于 2015-9-4 20:22:42 | 显示全部楼层
I just finished (mostly) my Cessna. I painted it to resemble that plane I had the most time in chasing after spot lighters and poachers. Even though that was a 185, This design works for me. The only areas where I strayed from the plans were the wing, tail servo mounting, and landing gear arrangement. I did not use the score cut and crease method for the win, rather I peeled the paper from the inside of the curved wing section. I did this as an experiment and for aesthetic reasons. I mounted the tail servos under the turtle deck purely for aesthetic reasons. The landing gear/tail wheel were what I had around so I decided to use them. All I need to do to finish this is to close the front of the engine area.Hopefully the weather will hold for the day so I may be able to take it for its maiden flight.

塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作


塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作


塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作

 楼主| 发表于 2015-9-4 20:23:05 | 显示全部楼层

塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作


塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作


塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作


塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作

 楼主| 发表于 2015-9-4 20:23:42 | 显示全部楼层
Making progress. Never enough time. But the plans are great Timmy.

塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作

 楼主| 发表于 2015-9-4 20:24:50 | 显示全部楼层
Well, I unintentionally removed the built in down trim on my first cessna, and it ended up at the top of a tree...
However, 48 hours later:

塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作


This one has both a training wing with 7 degrees of dihedral (no ailerons) and a standard wing with ailerons. It flies excellently with either, though it definitely looks a little nicer with the standard wing. I also removed most of the positive wing incidence before I discovered the built in down angle on the elevator, so that changed the characteristics a little bit.
I'm using a rewound 2836 1000v motor and a 9x4.7 slo fly prop, and a 2200 3s lipo, so it can get in the air in about 20 ft on gravel or asphalt, and maybe 30 on rough weeds.
I'll post a photo of the first one when I can get it out of the tree.

 楼主| 发表于 2015-9-4 20:26:16 | 显示全部楼层

塞斯纳180电动模型飞机制作

塞斯纳180电动模型飞机制作

It flew about the same actually. I did get it down, thanks! I had to climb a 40 foot tree, but I got it down.
I didn't understand what the shims were for. I'm rarely suspicious when I find spare parts, usually my builds fly fine without all the optimization.
She was also extremely tail heavy, I found a rock that I was using for nose weight in the tail when I got it down...

发表于 2015-9-4 22:53:44 | 显示全部楼层
挺漂亮的。
您需要登录后才可以回帖 登录 | 注册

本版积分规则

手机版|辽公网安备 21100402204006号|科技论坛 ( 辽ICP备07501385号-1    

GMT+8, 2017-10-23 04:53

Powered by X3.3 Licensed

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表