科技论坛

 找回密码
 注册

扫一扫,访问微社区

查看: 5057|回复: 6

[技术] 太阳能烤箱制作

[复制链接]
发表于 2009-1-5 12:56:15 | 显示全部楼层

太阳能烤箱制作

工具和材料

  Corrugated cardboard (large flat sheets from appliance boxes work best) 瓦楞纸板(大单位介绍工作从设备盒最好)

  Duct tape 胶带

  Black tempera paint, powdered 黑温度油漆,粉末

  White glue 白胶

  Plastic container, approximately 500 ml 塑料容器,大约500毫升

  Oven thermometer 烤箱温度计

  Aluminum foil (45.7 cm by 7.6 m roll) 铝箔( 45.7厘米七点六米辊)

  1 large aluminum foil cake tin (15 cm by 30 cm by 8 cm deep) 1大型铝箔蛋糕锡( 15 cm * 30 cm的8厘米深)

  1 large (turkey-sized) transparent oven bag 1大(土耳其大)透明炉袋

  Shredded paper (for insulation) 丝纸(绝缘)

  Cardboard box (with flaps, approximately 25 cm by 35 cm by 16 cm deep) 纸箱(与皮瓣中,约有25厘米35厘米16厘米深)

  Plastic spoon 塑料勺子

  Utility knife 美工刀

  Meter stick or metric tape measure 米棒或公制卷尺

  Felt tip marker 费尔特提示标志

  Sunglasses 太阳镜

  Paint brush, 3 to 5 cm wide 画笔, 3至5公分宽

  Oven mitts 烤箱手套 [CP-4C: Solar oven construction materials. Caption:Solar oven construction materials. Source: original digital photo. SeeCD. Photo Credit: The Pembina Institute]

  

  Solar oven construction materials. 太阳能烤箱建筑材料。 Photo Credit: The Pembina

  Institute

  A. Prepare the Reflective Panels 答:准备好反光板

  Organize your workspace.组织您的工作空间。 You will need a large tabletop towork on.您将需要大量的工作台面。 It is very helpful to have a sink nearby forcleaning up.这是非常有益的水槽附近清理。 Arrange your materials and tools so you canget to them conveniently.安排您的材料和工具,让您能够给他们方便。 [CP-4D: Reflectorblueprint. Caption: Measure and cut two each of these two panels fromcorrugated cardboard. Source: CD. Credit: None. Copyright line:Copyright The Pembina Institute for Appropriate Development]

  

  Measure and cut two each of these two panels from corrugated cardboard. 衡量和削减两个这两个小组由瓦楞纸板。

  The Pembina Institute

  Using a meter stick and felt pen, draw the outlines of the reflectorsegments on your cardboard.用米坚持并认为笔,提请概述反射部分在您的硬纸板。 Use themeasurements on the blueprint above.使用测量的蓝图以上。

  Using theutility knife, carefully cut out the 4 cardboardsegments.用美工刀,仔细剪下4纸板部分。 Use a ruler or straight-edge to help guideyour cuts.用一把尺子或直边,帮助指导您的削减。 CAUTION: Utility knives can bedangerous.注意:实用刀可能是危险的。

  

  Spreading

  glue on the cardboard.

  The Pembina Institute

  

  Smooth out the foil carefully, removing any wrinkles or bubbles as you go 理顺箔仔细,消除任何皱纹或气泡作为你去

  The Pembina Institute

  

  The Pembina Institute

  

  The Pembina Institute

  

  The Pembina Institute

  Remove the top from the white glue bottle and pour approximately 100ml (about 1/3 cup) into the plastic container.删除顶端从白胶瓶,倒入约100毫升(约1 /3杯)的塑料容器。 Add 4 tablespoons of water to the glue and stirthoroughly.加4汤匙水搅拌胶水彻底。 This will make the glue thinner and easier tospread evenly.这将使胶更薄,更容易均匀。

  Carefully unroll enough aluminumto completely cover one section.仔细展开足够铝完全覆盖一节。 Keep the foil as smoothand flat as possible.铝箔作为保持平稳,尽可能持平。 Wrinkles and creases in the foilwill reduce the efficiency of the reflector.皱纹和皱褶的铝箔将降低效率的反射。 If thecardboard is wider than the foil, use two pieces of foil and plan tojoin them near the middle.如果是更广泛的纸板比铝箔,使用两片金属箔和计划加入他们靠近中东。

  Using the paintbrush, apply a thin layer of white glue over the entiresurface of the cardboard.用画笔,适用于薄薄的一层白胶在整个表面的纸板。 Be sure to spread theglue right to the edge of the cardboard.一定要传播权的胶水边缘的纸板。 Use the flatedge of a piece of scrap cardboard as a squeegee to spread the glue outevenly.使用单位边缘的一块废铁纸板作为传播刮胶的均匀。 [CP-4E: Spreading glue on the cardboard.Caption: None. Credit: The Pembina Institute]

  Before the gluedries, place the foil on the cardboard shiny side up, and smooth itdown over the entire surface.在干涸的胶水,把铝箔的纸板光泽的一面,并顺利下来的整个表面。 Try topress out any wrinkles, bubbles, or creases in thefoil.尝试按下任何皱纹,气泡,或折痕的铝箔。 If your foil gets badly wrinkled during thegluing process, tear it off and try again with freshglue.如果您的铝箔被严重皱纹在粘合过程中,迫不及待地把它关闭,然后再试一次新的胶水。 [CP-4F: Pressing the foildown. Caption: Smooth out the foil carefully, removing any wrinkles orbubbles as you go. Source: original digital photo. See CD. PhotoCredit: The Pembina Institute]

  Using the utility knife, trimthe foil so that it is flush with the edge of the cardboard allaround.用美工刀,装饰的金属箔,以便它是充裕的边缘纸板各地。 Set the panel aside to dry.设置小组一边干。

  Repeat steps 3 through 5 for the remaining sections.重复步骤3到5的其余部分。

  Rinse the paint brush thoroughly under the tap to remove anyglue.冲洗画笔下的自来水彻底消除任何胶水。 The glue-water mixture can be used in Part Dbelow, so put a lid on the container to keep the glue from dryingout.涂胶水混合物可用于下文D部分中,所以把盖子的容器保持胶水从干燥。

  B. Join the Panels 湾加入该小组

  Cut 8 pieces of duct tape 60 cm long and set them aside (stick them tothe edge of the table for easyretrieval).削减8件胶带60厘米长,将它们搁置(坚持他们的边缘表易于检索) 。

  Arrange thesegments as shown in the photo below, foil side down, wide sectionsalternating with narrow ones.安排部分所显示的照片下面,铝箔一方下降,全节交替窄的。 The narrow endof each should point toward you.狭隘的,每年年底应指向你。 [CP-4G: Segments arrangedon tabletop.  Caption: None. Credit: The Pembina Institute]  

  Carefully position the first two panels, keeping a 2 mm space betweenthem.仔细立场两个小组的第一,保持着2毫米的空间关系。 Position one of your 60 cm strips of ducttape over the joint between the panels.您的位置60厘米条状胶带之间的联合专家小组。 Press itonto the joint, being sure it sticks securely to both panels over itsfull length.新闻它放到联合,目前正在确定它坚持安全两个小组的全长。 [CP-4H: Taping the joint.Caption: Source: original digital photo. See CD. Photo Credit: ThePembina Institute]

  Join the third and fourth panels as in step 3 above.加入第三和第四小组在上述步骤3 。

  Carefully flip the joined panels over on the table.仔细翻转加入小组的桌子上。 Thismay require two people.这可能需要两个人。 Reinforce the joint between each panelusing another strip of duct tape.加强彼此之间的联合小组用另一狭长胶带。

  Standyour reflector up (foil side in), bringing the edges of the outer twopanels together.站在你的反射行动(铝箔方面) ,使边缘外两个小组在一起。 Have your partner hold thereflector in position while you add the last piece of ducttape.有你的合作伙伴持有的立场,而在反射添加最后一块胶带。 [CP-4I: Taping the last joint. Caption:None. Source: original

  digital photo. See CD. Photo Credit: The Pembina Institute]

  Finish the last joint inside the reflector by applying the remaining piece of duct tape.完成最后联合内反射运用剩余一块胶带。

  

  The Pembina InstituteC. Add the Insulated Box c.添加绝缘盒

  Using duct tape, fasten the cardboard box securely to the bottom ofthe reflector by its flaps.用胶带,加快纸箱安全的底部反射其皮瓣。 Be sure the box iscentered.可以肯定的方块为中心。 Add a few strips of duct tape to the corners tomake the assembly more rigid.加上几片胶带的角落,使大会更为刚性。 [CP-4J: Adding the box.Caption: none. Source: original digital

  photo. See CD. Photo Credit: The Pembina Institute]

  Shred some newspaper by tearing it lengthwise into thinstrips.一些报纸的一丝一毫它纵向撕裂成细条。 You can also use paper from a mechanicalpaper shredder.您也可以使用本文从机械碎纸机。 Stuff shredded paper into the gapsbetween the box and the reflector.东西切碎文件纳入之间的差距框和反光板。 Leave a little ofthe paper on the bottom of the box, as shown in theillustration.留下一个小的文件底部的方块中,所显示的说明。

  

  Insulate the box below the reflector using shredded newsprint. 隔离下面的方块中的反射使用切碎新闻纸。

  The Pembina Institute[CP-4K: Cross section. [处长- 4000 :截面。 Corel Draw/ jpeg illustration. Corel的抽奖/ JPEG文件格式的说明。 Caption: Insulate the boxbelow the reflector using shredded newsprint. 标题:隔离下面的框中的反射使用切碎新闻纸。Copyright: The Pembina Institute] 版权所有:彭比纳研究所]

  

  Use two coats of black paint to coat the inside of the baking chamber. 使用两个大衣黑色油漆涂层内部的烘烤厅。

  The Pembina InstituteD. Prepare the Baking Chamber 4准备烘烤商会

  In the plastic container, use your plastic spoon to mix 2 teaspoons ofblack tempera paint with one teaspoon of white glue and two teaspoonsof water (you can substitute glue and water from Part A above if youhad any leftover).在塑料容器,使用塑料勺子混合2茶匙的黑油漆彩画一茶匙白胶和两个小勺水(您也可以替换胶和水从上述A如果您有任何遗留下来的) 。

  Using the brush, apply the black paint evenly over the inside of analuminum foil loaf tin.用刷子,适用于黑色油漆均匀内铝箔面包田。 Set this aside todry.设置此一边干。 It may be necessary to apply two coats of the paint toensure full coverage of the aluminum.可能有必要适用于两个大衣的油漆,以确保全面覆盖的铝。

  [CP-4L: Painting the baking tin. [处长- 4升:油漆烘烤锡。 Caption: Use two coatsof black paint to coat the inside of the baking chamber.标题:使用两个大衣黑色油漆涂层内部的烘烤厅。 Source: original digital photo. 资料来源:原始的数码照片。See CD. 见光盘。 Photo Credit: The Pembina Institute] 图片信用:彭比纳研究所]
 楼主| 发表于 2009-1-5 13:01:43 | 显示全部楼层
发表于 2009-1-5 19:55:51 | 显示全部楼层

能下吗?

能下吗?

好象下不了

搞前搞后的 老搞不好

发表于 2009-1-5 21:31:21 | 显示全部楼层
可以下载了。
发表于 2009-1-5 23:21:57 | 显示全部楼层
可以下载?
发表于 2015-10-24 06:50:03 | 显示全部楼层
求沙发
发表于 2015-11-23 07:26:50 | 显示全部楼层
围观 围观 沙发在哪里!!!
您需要登录后才可以回帖 登录 | 注册

本版积分规则

手机版|辽公网安备 21100402204006号|科技论坛 ( 辽ICP备07501385号-1    

GMT+8, 2017-9-24 23:38

Powered by Discuz! X3.2 Licensed

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表